Commercial case study · Hinckley

Dedicated air conditioning for a Hinckley server room.

Climetech installed a Fujitsu Airstage wall-mounted split system to provide cooling for a server room, with condensate managed by a pump and the system checked during commissioning.

Completed Fujitsu Airstage wall-mounted air conditioner in the Hinckley server room, with condensate pump below
CommercialServer room cooling
Fujitsu AirstageWall-mounted split system
HinckleyLeicestershire installation
8°CMeasured air outlet reading
The project

Cooling for a room with equipment that needs a stable environment.

Server rooms contain equipment that produces heat while operating. This Hinckley business needed dedicated air conditioning for its server room, so Climetech installed a Fujitsu Airstage wall-mounted system.

Planned around the room and its drainage route.

The indoor unit was mounted high on the block wall. A condensate pump was fitted beneath it to remove condensate where a gravity-drain route was not practical. The pipework was contained neatly beside the unit.

System checks at handover.

After installation, the system was run and checked. During commissioning, the air leaving the indoor unit was measured at approximately 8°C. The finished installation provides the room with dedicated cooling for its server equipment.

Climetech Ltd installs and maintains commercial air conditioning across Leicestershire, Northamptonshire and Warwickshire. Every project is surveyed so the equipment, location and installation route can be considered before work begins.

Commercial air conditioning in Hinckley →

Completed Fujitsu Airstage wall-mounted air conditioner in the Hinckley server room, with condensate pump below
Completed wall-mounted unit and condensate pump
Server room wall before the new air conditioning system was installed
The server room before installation
Fujitsu Airstage indoor unit during installation in the Hinckley server room
Indoor unit during installation
Indoor unit mounting plate levelled on the server room wall
Careful positioning of the mounting plate
Digital thermometer showing an 8 degree Celsius air outlet reading during commissioning
Supply air measured at approximately 8°C during commissioning
Fujitsu outdoor unit connected to commissioning gauges during system checks
Outdoor unit checks during commissioning

Need cooling for a server or comms room?

Arrange a site survey to discuss the room, heat load, equipment position and practical installation options.

Request a commercial survey
WhatsApp us